Table of Contents
Advertisement
5.
(Function) key
F
MONI
6.
key
SRCH
7.
key
LAMP
8.
key
9. VOL/SQL key
10. UP/DOWN key
11. POWER switch
12. Hardware reset key Press to reset all functions to their factory-settings.
13. Busy lamp
14. Speaker
PMS
15.
key
SET
VFO
A=B
16.
key
MRMW
17.
key
18. Display
19. Key pad
20. Built-in microphone Use to pick up the sound and record it, or use in
Note:
PTT (Press to talk) key is usually attached to a transceiver. In the DJ-X2000,
SRCH
the
key is used as a PTT key in transceiver mode. You can transmit a
signal while PTT key is held down, or every press of PTT key switches
between transmission and reception.
Use this key in combination with other keys to call up
specific functions.
Temporarily cancels the squelch for the duration it is
held down. Used independent of squelch level.
Press to start scanning with in a 40-channel range.
Use in combination with
7-channel range.
In transceiver mode, this key is used as a PTT key.
(See "Note" below.)
Turns the key backlight ON/OFF.
Use to adjust the audio volume and squelch level.
Use to set frequency, to adjust the audio volume and
squelch level, to set various settings, and to select an
item in menu display.
Turns power ON/OFF.
However, data stored in memory is not deleted.
Settings might return to the settings when power was
turned ON the last time.
Lights green when a signal is picked up and stays lit
while the signal is alive. Lights orange when receiving
FM radio in stereo (using stereo earphones).
In Transceiver mode, lights red while transmitting.
Sound is produced from here.
Shifts to the scan programming mode. If pressed in
combination with the
be saved in memory.
Engages the dual VFO mode. If pressed in
combination with the
in the top band is copied in the bottom band.
Use to access the memory. If pressed in combination
with the
key, frequencies and other data can be
F
saved in memory.
Displays frequency, operating status and other
information pertinent to use.
In the VFO mode, use these keys to directly input the
frequency you want. Press in combination with the
key to access other functions.
transceiver mode.
key to start scanning in a
F
key, the scan program can
F
key, the frequency displayed
F
F
9
Advertisement
Table of Contents
