Table of Contents
Advertisement
1. Ensure that the transceiver is OFF when recharging the battery pack. The use
of the transceiver during the recharging can cause the transceiver to
malfunction.
2. The battery charger is designed to be used at an ambient temperature
between 10°C and 40°C. Avoid recharging the battery pack at any
temperature outside this range.
3. Do not repeatedly recharge the fully recharged battery pack. This can cause
the performance of the battery pack to deteriorate. The battery pack can be
recharged 500 times when it is used normally. If the life of the completely
recharged battery pack becomes markedly shorter, the battery pack is
considered to have been exhausted. Please purchase a new battery pack.
4. Do not insert the battery pack in a reverse direction.
5. When the battery pack has been recharged completely with the lamp blinking
in green, remove the battery pack from the battery charger.
6. If the battery charger is not used for a long period of time, disconnect the AC
power cord from the wall socket, and remove the battery pack from the battery
charger.
7. If you recharge the battery pack of which voltage has abnormally dropped
due to discharge, the lamp starts blinking in red and the preliminary recharge
initiates immediately after you have started recharging the battery pack.
Subsequently, the lamp will be illuminated in red, indicating that the quick
recharge has started.
8. If any irregular battery pack is set in place, the lamp will blink alternately in red
and green.
1.5.4 Battery low alarm
When batteries get low, the
display to the sound of a repeated siren-like alarm.
Change the batteries as soon as possible.
However, the alarm is not emitted if the beep is turned
OFF.
18
Precautions in recharging
icon appears on the
Advertisement
Table of Contents
