Table of Contents
Advertisement
2
Select the program bank on which you want to set a memory channel
for scanning.
Using the dial or UP/DOWN key, point the arrow at the
program you want to set. Press the
3
Select the program number you want to assign to a memory channel.
Using the dial or UP/DOWN key, point the arrow at the
program number you want to select. Press the
4
Select a memory bank.
Select a memory bank and then press the
Using the dial or a numeric key, specify a memory bank
number (Pressing the
A through E). Move the arrow back to the position
pointing at the channel by pressing the DOWN key.
5
Select a memory channel.
Using the dial or a numeric key, specify a memory
channel number. Press the
SKIP
setting, press the
CLR
Repeat the above steps 2 through 5 to register all the channels on which you are
scanning, and then press the
The display will return to the PMR BANK screen. Point the arrow at END and
TF
then press the
key (Alternatively you may press the
ENT
key with
shown on the display).
TF
key.
ENT
TF
ENT
F TUNE
key toggles from bank groups
TF
key (To cancel the
ENT
key).
TF
key.
ENT
PMR
B ANK
B ANK 1
TF
key.
P
MR BANK
ENT
PG
PG 1 - - - - -
key.
P
MR MEMORY
A 2 - - - - . - - - -
- - - - - - - -
P
MR MEMORY
A 2
8 4 . 5
1 2
A BC
key, and then
F
- - - - -
TF
ENT
75
Advertisement
Table of Contents
