Preset Scan; Memory Scan - Alinco DJ-X11 Instruction Manual

9-4 Preset Scan

Press the
1
Press the
2
P r e s s t h e
3
scanning.
During scanning, the decimal point of the
displayed frequency fl ashes.
Press the [FUNC] or
4

9-5 Memory scan

In Memory mode, either a specifi ed bank or all banks are scanned. The memory
scan offers the following three types of scanning methods.
Single bank scan
Group scan
All-bank scan
• Banks other than those for normal memory channels cannot be
scanned.
MEMO
• By using the utility software to expand the bank, the all-bank scan can
be expanded to scan between banks 0 and 49.
• The group scan cannot be used unless the Bank Link setting (P. 54) is
completed.
Press the
1
Hold down the
2
tate the upper dial to select the
scan type.
The following types are available for the
memory scan.
• Single bank scan
• Group scan
• All-bank scan
When the single-bank scan is selected, the current bank will be scanned.
3 Release the
During scanning, the decimal point of the displayed frequency fl ashes.
4 Press the [FUNC] or
key to switch to Preset mode.
key to select the band.
k e y t o s t a r t
key to stop scanning.
This scans only through a specifi ed bank.
This scans only a group of previously selected
banks.
This scans all available banks which are
previously programmed.
key to switch to Memory mode.
key and ro-
key to start scanning.
key to stop scanning.
9. Useful Functions
187.600
FM
433.000
VFO
145.000
MR
0 0 2
0 1 1
Single bank scan
B S
W F M
F M
9
B S
65