Installation Procedure - MUTOH ValueJet VJ-1604 User Manual

3.1 INSTALLATION PROCEDURE

Installation procedure when using the network connection
Step Action
1 Connect the power cables.
2 Install the ink cassettes.
3 Connect the printer to the PC.
Notes
•
For more information on this topic please refer to the Installation Guide.
Notes
•
Do not open the front cover during printing. If the front cover is opened, printing will be interrupted.
•
Printing restarts if you close the front cover. However you are not guaranteed to have a high print
quality
Notes
•
There are two optional winding systems available for the ValueJet 1604
Unwinder/Winder 100
o
Motorized winding system with tensioning (T winder)
o
•
Please refer to the User Guide of the chosen system to know how to correctly install the winding system
Refer to the pricing sheet for more details of these systems.
•
If you do not use one of the above winding systems. You have to use the scroller which is supplied with
the printer.
Be sure to read and understand the safety warnings before handling the printer.
Starting point: ASSEMBLED VALUEJET
Result: FULLY- INSTALLED VALUEJET
↓
Reference
Power Cables Connections
Installing ink cassettes for the first time
Connecting network interface cable
↓
26 AP-75760 – Rev 1.1 -21/06/2007,
User's Guide ValueJet 1604
Chapter 3 : Installing the Unit