MUTOH ValueJet VJ-1604 User Manual page 80

Step 6 : The setting in the blinking part on the LCD monitor of the operation panel can be changed. Press
the [+] key or the [-] key to change the setting.
Step 7 : To save the changed setting, press the [ENTER] key on the operation panel.
The setting is saved and the next setup item is displayed.
Notes
•
If you press the [CANCEL] key, [+] key or the [-] key without pressing the [ENTER] key after changing a
setting, the change will not be saved.
Step 8 : Press the [CANCEL] key on the operation panel to exit from the setup.
The previous setup menu is displayed.
When the main menu is displayed, the screen turns to Normal.
Chapter 4: Handling the printer
80 AP-75760 – Rev 1.1 -21/06/2007,
User's Guide ValueJet 1604