Test Print - MUTOH ValueJet VJ-1604 User Manual

4.4 TEST PRINT

4.4.1 Overview and functions of the test prints
Testplot Function
Nozzle Check To check the head nozzles.
Mode print To check the print conditions.
Setup print To check the current setup of the printer.
Palette Print To compare output colours with printing colours.
4.4.2 Performing a test print
Be sure to read and understand the safety warnings before handling the printer.
Step 1 : Verify that the printer has been switched ON and that media more than A3 size has been loaded.
See "Installing roll media" and "Loading roll media"
Step 2 : Verify that the printer is in Normal mode.
Step 3 : Press the [Menu] key on the operation panel.
Result:
•
The first submenu of the Setup menu is displayed.
•
The operation panel displays "Menu 1: Setup>".
•
The printer is in Menu mode.
Step 4 : Press the [-] key on the operation panel.
Result: The operation panel displays " Menu 2: Test Print>"
Chapter 4: Handling the printer
Action to be performed
when needed
Perform a head cleaning.
Change print conditions.
Change setup.
Check colour mode
68 AP-75760 – Rev 1.1 -21/06/2007,
User's Guide ValueJet 1604