MUTOH ValueJet VJ-1604 User Manual page 77

Step 14 : Check that the confirmation pattern printing result is as follows.
2A 1B 1A
4B
2A 1B 1A
•
When the printing result is :
You do not to need perform an Alignment.
•
When the printing result is :
You need to perform an Alignment.
•
Register a set value for Bi-D Quality (two-way printing/quality priority mode).
Step 15 : Press the [+] or [–] key on the operation panel to select "Adj.4: Bi-D Quality".
Step 16 : Press the [Enter] key on the operation panel.
4A 3B 3A 2B 2A
4B 4A 3B
1B 1A 4B 4A 3B
77
User's Guide ValueJet 1604
Chapter 4: Handling the printer
3A 2B 2A 1B 1A
3A 2B 2A 1B 1A
AP-75760 – Rev 1.1 -21/06/2007,
Q