When You Cannot Generate Graphics In The Way You Want - MUTOH ValueJet VJ-1604 User Manual

Be sure to read and understand the safety warnings before handling the printer.
Notes
•
If an error not included in any items of this section occurs, contact your local MUTOH dealer.
Notes
•
If you want to receive product warranty, prepare the warranty certificate. If the warranty certificate is not
presented, the repair will not be covered by the warranty even if within the warranty period.
•
If you have signed a maintenance service contract, prepare that or a similar document.
6.1 WHEN YOU CANNOT GENERATE GRAPHICS IN THE WAY
YOU WANT
6.1.1 Perform Head cleaning
If the nozzle check result indicates that the checked points are blurred or missing, clean the print head.
Step 1 : Switch ON the printer and load the roll media.
Refer to: "Setting roll media"
Step 2 : Confirm that the printer functions normally.
Step 3 : Press the [Nozzle Check] key on the operation panel for at least 2 seconds.
•
Perform the nozzle check printing.
Step 4 : Check the print sample for blurred or missing points.
Step 5 : If the nozzle check result indicates that the checked points are blurred or missing, clean the
head.
For more information please refer to: "Head cleaning"
124 AP-75760 – Rev 1.1 -21/06/2007,
User's Guide ValueJet 1604
Chapter 6 : Troubleshooting