4.8.2 Stop printing
Be sure to read and understand the safety warnings before handling the printer.
If you want to stop printing, operate as follows.
Step 1 :
Stop sending printing data from the computer to the printer.
Step 2 :
Press the [Cancel] key on the operation panel.
The printer operates as follows.
Printer status
Printing
Receiving / Converting
Notes
•
If a large amount of data is saved on the printer, the operation panel may not return to Normal by a
single [Cancel] operation.
•
In such cases, wait a few seconds and press the [Cancel] key again.
4.8.3 Pause printing
It is possible to pause during printing.
Notes
•
If the printing operation is paused, the output quality can not be guaranteed.
Step 1 :
Press the [-] key on the operation panel.
•
The printer pauses the operation.
•
"PrintRestart ==> ENTER" is displayed on the operation panel.
Step 2 :
To restart the printing operation, press the [ENTER] key on the operation panel.
Operation with the [Cancel] key pressed
Terminates printing and deletes the non printed data.
Delete the received / analyzed data and the remaining incoming data
100
AP-75760 – Rev 1.1 -21/06/2007,
User's Guide ValueJet 1604
Chapter 4: Handling the printer