(2) Steps after transfer
Step 1 :
Choose a suitable place to install the printer.
Refer to "Installation guide"
Step 2 :
Verify that the butterfly bolts fixing the stand with the printer are well fixed.
Step 3 :
Connect all cables.
Step 4 :
Perform a nozzle check, and verify that there is no clogging in the printer head.
Refer to "Nozzle check"
Step 5 :
Perform a head alignment.
Refer to "Adjust print"
40
AP-75760 – Rev 1.1 -21/06/2007,
User's Guide ValueJet 1604
Chapter 3 : Installing the Unit