MUTOH ValueJet VJ-1604 User Manual page 103

4.8.5.2 Settings that can be changed or confirmed while printing.
Notes
•
The Print start menu is displayed only when the printer is warming up.
•
When you change a setting during operation, be sure to select "Backup" to save the setting that you
changed.
•
If the printer returns to Normal without "Backup" being selected, the changed setting is not saved
Setup Item
Print Start
Pre
Temperature Platen
After
Pre Heater OFF / 30°C to 50°C
Platen Heater OFF / 30°C to 50°C
After Heater OFF / 30°C to 50°C
PF Adjust -20 pulse to 0 to 20 pulse
Backup
Be sure to read and understand the safety warnings before handling the printer.
Setting
----
----
----
103
Chapter 4: Handling the printer
Description
[ENTER] key: if the heater temperature does not
reach the set value during warming-up, printing
starts.
Check the current Pre Heater temperature.
Check the current Platen Heater temperature
Check the current After Heater temperature
Change the Pre Heater temperature
Change the Platen Heater temperature
Change the After Heater temperature
Change the feed adjustment value
[ENTER] key: Save the changed setting.
[CANCEL] key: the printer returns to normal.
AP-75760 – Rev 1.1 -21/06/2007,
User's Guide ValueJet 1604