MUTOH ValueJet VJ-1604 User Manual page 64

Step 12 : Perform Micro adjustment printing.
• Display the Media feed compensation menu on the operation panel.
• Press the [+] key or [–] key to select "PF4: Micro Adj. Print".
• Press the [Enter] key on the operation panel.
The operation panel displays "Printing".
o
Start Micro adjustment printing.
o
Current adjustment value
• After the micro adjustment printing is completed, the operation panel displays "PF4: Micro Adj. Print".
Step 13 : Refer to the illustrations below and check the printing result.
Input the adjustment value
Step 14 : Set up the Micro Adjustment Change.
• Press the [+] key or [–] key to select "PF5: Micro Adj.Change".
• Press the [Enter] key on the operation panel.
o The operation panel displays "Micro: 0pulse".
• Press the [+] key or [–] key and enter the micro adjustment value according to the printing result in
step 16.
• Press the [Enter] key on the operation panel.
o The micro adjustment value is saved.
o The operation panel displays "PF5: Micro Adj.Change".
o The Media feed compensation is complete.
2
1
0
1
2
64
User's Guide ValueJet 1604
Chapter 4: Handling the printer
AP-75760 – Rev 1.1 -21/06/2007,