MUTOH ValueJet VJ-1604 User Manual page 13

Follow the instructions below when handling the power plugs. Otherwise, fire may occur.
•
Wipe away dust and any other residue before inserting the plugs.
•
Ensure that the plugs are firmly inserted as far as it will go.
Ensure that the plugs have been disconnected from the power sockets when they are not used for a long time.
Earth wires must be connected to wires or terminals that fulfil the following conditions :
•
Power sockets with earth terminals.
•
Earth wires with copper, at least 650 mm under the ground.
Keep the printer horizontally while transferring.
Do not make the main body of the printer slanting or place it in a vertical position, nor keep the printer
upside down. There is a possibility that the ink inside the printer may leak. Moreover, normal operation
after shifting to these positions cannot be guaranteed.
Do not drop waste fluid when replacing the spitting-box sponges. If waste fluid comes into contact with the grid
roller, the surface of the grid roller will be damaged, and the media feed function may be affected.
When cleaning around the print head
•
Do not touch the nozzle of the print head, doing so may damage the print head.
•
Do not touch the head of the cleaning stick, oil on your hands may attach to the cleaning stick, causing
damage to the print head.
•
Do not immerse the head of the cleaning stick in water, doing so may damage the print head.
•
Do not reuse the cleaning stick, dust attached to the stick may damage the print head.
13 AP-75760 – Rev 1.1 -21/06/2007,
User's Guide ValueJet 1604
Chapter 1: Safety Instructions