MUTOH ValueJet VJ-1604 User Manual page 139

White or black lines appear on printed media
No. Possible cause
Are you using the
recommended media?
1
Is the roll media set
2
correctly?
Is the nozzle in good
3
condition?
Did you perform an
4
Alignment?
Did you perform a
Media feed
5
compensation?
Is each heater set to
the appropriate
6
temperature?
Is the head height set
to High?
7
Printing lines are not straight
No. Possible cause
Is the ink cassette
within the validity
1
period?
Are you using the
recommended media?
2
Did you perform an
3
Alignment?
Did you perform a
Media feed
4
compensation?
Printing lines are duplicated or patchy
No. Possible cause
Is the nozzle in good
1
condition?
Is the head height set
to High?
2
Use the recommended media.
Set the roll media correctly.
Perform Head cleaning.
Perform Alignment.
Perform Media feed compensation.
Set it to the appropriate temperature.
Return the head height to "Normal (Low)".
Use a new ink cassette.
Use the recommended media.
Perform Alignment.
Perform Media feed compensation.
Perform Head cleaning.
Return the head height to "Normal (Low)".
139
Remedy
Remedy
Remedy
AP-75760 – Rev 1.1 -21/06/2007,
User's Guide ValueJet 1604
Chapter 6 : Troubleshooting
Reference
Loading roll media
Head cleaning
Adjust the print head
"Media feed
compensation"
"Panel setup menu"
"Head height
adjustment"
Reference
Replacing ink
cassettes
Adjust the print
head
"Media feed
compensation"
Reference
Head cleaning
"Head height
adjustment"