Step 5 :
Press the [+] key or [-] key to select "Set20: CR Maintenance".
Step 6 :
Press the [ENTER] key on the operation panel.
•
"CR Mainte.: Start" is displayed on the operation panel
•
The display enters the CR Maintenance menu.
Step 7 :
Press the [ENTER] key on the operation panel.
•
Maintenance starts.
•
The print head moves to the left.
•
The wiper moves forward.
•
"CR Maintenance: End" is displayed on the operation panel.
Chapter 5: Periodical maintenance
113
AP-75760 – Rev 1.1 -21/06/2007,
User's Guide ValueJet 1604