Cutting Media - MUTOH ValueJet VJ-1604 User Manual

4.8.4 Cutting media

Step 1 : Verify the following regarding the operational condition of the product.
• The operation panel displays: "Ready to print".
Step 2 : If the roll media cut position is changed, refer to "Feeding media" and advance the roll media to
the desired cut position.
Step 3 : Open the front cover.
1
Step 4 : Place a razor blade on the media cut groove on the media guide, and cut the roll media.
1
•
Cutting roll media is complete.
Notes
•
When loading the new roll media, cut the front edge of the media if it is not straight.
No. Name
1 Front Cover
2 3
No. Name
1 Media guide
2 Media cut groove
3 Razor blade
101
User's Guide ValueJet 1604
Chapter 4: Handling the printer
AP-75760 – Rev 1.1 -21/06/2007,