Step 5 :
Press the [>] key on the operation panel
Result:
•
The operation panel displays "Test1: Nozzle Check".
•
The display enters the Test Print menu
Step 6 :
Press the [+] key or [-] key on the operation panel to select the item you want to print and press
the [Enter] key.
Submenus: · Nozzle Check · Mode print · Setup print · All Set List · Palette print
Result: Printing starts for the selected submenu.
Notes
•
Please refer to the following topics for details on each item of the test print list:
Nozzle Check to Palette print
•
When "Banner 1" or "Banner 2" is set in the Print Mode menu, "PalettePrint" is not displayed on the
Test Print menu.
Chapter 4: Handling the printer
69
AP-75760 – Rev 1.1 -21/06/2007,
User's Guide ValueJet 1604