MUTOH ValueJet VJ-1604 User Manual page 131

Step 23 : Press the [+] or the [-] key to enter the number that you selected in step c.
Step 24 : Press the [ENTER] key on the operation panel.
•
The set value for BI-D Quality is registered.
•
"Adjust5:Bi-D Quality" is displayed on the operation panel.
Step 25 : Register the setting for BI-D Normal (Two way printing/Normal mode) in the same way as in the
previous steps
Step 26 : Press the [Cancel] key on the operation panel several times.
•
The operation panel returns to Normal
•
Alignment ends
131 AP-75760 – Rev 1.1 -21/06/2007,
User's Guide ValueJet 1604
Chapter 6 : Troubleshooting