Disposal Of Waste Fluids - MUTOH ValueJet VJ-1604 User Manual

3.7 DISPOSAL OF WASTE FLUIDS.

Be sure to read and understand the safety warnings before handling the printer.
(1) Disposal period.
Dispose the waste fluids in the following cases.
When the waste fluid tank is more than half full.
When "Waste Ink Tank Full" is displayed on the operation panel.
(2) Disposal method.
Step 1 : Prepare an empty container such as a supply waste fluid bottle, to contain the waste fluid.
Step 2 : Lay a protective material on the floor under the waste fluid tank.
Step 3 : Open the waste fluid valve, and transfer the waste fluid to the container.
Notes
•
When transferring the waste fluid to the empty container, put the container close to the waste fluid
valve, so it could not splash.
Step 4 : After transferring the waste fluid to the empty container, close the waste fluid valve securely.
Step 5 : Wipe the opening of the waste fluid valve with a cloth, etc.
•
Disposal of waste fluids is now complete.
1
2
No. Name
1 Waste fluid valve
2 Empty container
1
2
38
User's Guide ValueJet 1604
Chapter 3 : Installing the Unit
AP-75760 – Rev 1.1 -21/06/2007,