Managing Kvm Target Servers (Port Page) - Raritan Dominion KX II-101-V2 User Manual

Managing KVM Target Servers (Port Page)

This Port page opens when you select a port from the Port Configuration
page that is connected to a target server. From this page, you can make
power associations and change the Port Name to something more
descriptive.
A server can have up to four power plugs that you can associate with the
power strip. In this page, you can define those associations so that you
can power on, power off, and power cycle the server from the Port
Access page, as shown below.
Note: To use this feature, you must have a Raritan Dominion PX power
strip attached to the device. See Connecting the Power Strip.
To access a port configuration:
1. Choose Device Settings > Port Configuration. The Port Configuration
page opens.
2. Click the Port Name for the port you want to edit.
Note: The Power Port 1 link is enabled only when a Raritan power strip is
connected to the KX II-101-V2 and configured. Otherwise, the link is
disabled.
Renaming a Port
To change the port name:
1. Enter a descriptive name, such as the name of the target server. The
name can be up to 32 alphanumeric characters and can include
special characters.
Note: Do not use apostrophes for the Port Name.
2. Click OK.
Chapter 6: Device Management
117