Raritan Dominion KX II-101-V2 User Manual page 177

Command Option
ipauto
ip ipaddress
mask subnetmask
gw ipaddress
mode <auto | 100fdx>
Interface Command Example
The following command sets the IP address, mask, and gateway
addresses, and sets the mode to auto detect.
Admin Port > Config > Network > interface ipauto
none ip 192.168.50.12 mask 255.255.255.0 gw
192.168.51.12 mode auto
Name Command
The name command is used to configure the unit and host name.
Syntax
name [unitname name] [domain name] [force
<true|false>]
name Command Example
The following command sets the unit name:
Admin Port > Config > Network > name unitname <unit
name> domain <host name> force trues
IPv6 Command
Use the IPv6_command to set IPv6 network parameters and retrieve
existing IPv6 parameters.
Ipv6_interface mode enable ipauto none ip
2001:db8:290c:1291::17 prefixlen 128 gw
2001:db8:290c:1291::1
Chapter 11: Command Line Interface (CLI)
Description
Static or dynamic IP address
IP address of the KX II-101-V2 assigned
for access from the IP network
Subnet mask obtained from the IP
administrator
Gateway IP address obtained from the
IP administrator
Set Ethernet Mode to auto detect or
force 100MB/s full duplex (100fdx)
169