Raritan Dominion KX II-101-V2 User Manual page 122

Chapter 6: Device Management
114
Viewing the KX II-101-V2 MIB
To view the KX II-101-V2 MIB:
1. Choose Device Settings > Event Management - Settings. The Event
Management - Settings page opens.
2. Click the 'Click here to view the Dominion SNMP MIB' link. The MIB
file opens in a browser window.
Note: If you have Read-Write privileges to the MIB file, use a MIB editor
to make changes to the file.
SysLog Configuration
To configure the Syslog (enable Syslog forwarding):
1. Select Enable Syslog Forwarding to log the device's messages to a
remote Syslog server.
2. Type the IP Address/Hostname of your Syslog server in the IP
Address field.
3. Click OK.
Note: IPv6 addresses cannot exceed 80 characters in length for the host
name.
Use the reset to defaults feature to remove the syslog configuration.