Raritan Dominion KX II-101-V2 User Manual page 129

To cancel without saving changes:

Click Cancel.
Managing Power Associations
To make power associations (associate power strip outlets with
the KVM target server):
Note: When a power strip is associated with the target server (port), the
outlet name is replaced by the port name. You can change this name in
the Port 2 page.
1. Choose the power strip from the Power Strip Name drop-down list.
2. Choose the outlet from the Outlet Name drop-down list.
3. Repeat steps 1 and 2 for each desired power association.
4. Click OK. A confirmation message appears.
To remove a power strip association:
1. Select the appropriate power strip from the Power Strip Name drop-
down list.
Chapter 6: Device Management
121