Step 3: Connect The Equipment - Raritan Dominion KX II-101-V2 User Manual

Chapter 2: Installation and Configuration

Step 3: Connect the Equipment

Power
The KX II-101-V2 is powered by a 100-240V AC input and 5VDC output
power adaptor that is included with the device.
For standard AC power, plug the included AC power adaptor into the
Power port and plug the other end into a nearby AC power outlet.
Network
Connect a standard Ethernet cable from the network port labeled LAN to
an Ethernet switch, hub or router.
The LAN LEDs that appear above the Ethernet connection indicate
Ethernet activity.
The yellow one blinks while the KX II-101-V2 is in use, indicating IP
traffic at 10 Mbps.
The green light indicates a 100 Mbps connection speed.
13