Raritan Dominion KX II-101-V2 User Manual page 128

Chapter 6: Device Management
120
5. Power ON the Raritan power strip.
6. Click to Device Settings > Serial Port to open the Serial Port page.
7. Select the Power Strip Control radio button and click OK. Once this
is done, the Power menu is available on the Remote Console.
Naming the Power Strip (Port Page for Power Strips)
Once the KX II-101-V2 is connected to a Raritan remote power strip, the
port is displayed on the Port page and you can open that port from the
Port Configuration page. The Type and the Name fields are
prepopulated. The following information is displayed for each outlet in the
power strip: Outlet Number, Name, and Port Association.
Use this page to name the power strip and its outlets. All names can be
up to 32 alphanumeric characters and can include special characters.
Note: When a power strip is associated to a target server (port), the
outlet name is replaced by the target server name (even if you assigned
another name to the outlet).
To name the power strip (and outlets):
Note: CommandCenter Service Gateway does not recognize power strip
names containing spaces.
1. Change the Name of the power strip to something you will
remember.
2. Change the (Outlet) Name if desired. (Outlet names default to Outlet
number.)
3. Click OK.