Raritan Dominion KX II-101-V2 User Manual page 40

Chapter 3: Working with Target Servers
32

Click on the blue, left-facing arrow located approximately halfway
down the left side of the panel. Once the panel is collapsed, click the
blue arrow again to expand it.
Port Access Page
After successfully logging in to the KX II-101-V2 Remote Console, the
Port Access page appears. This page lists the KX II-101-V2 port, the
connected KVM target server, and its availability. The Port Access page
provides access to the KVM target server connected to the KX II-101-V2.
A KVM target server is a server that you want to control through the KX
II-101-V2 device. They are connected to the KX II-101-V2 ports at the
back of the device.
To use the Port Access page:
1. From the KX II-101-V2 Remote Console, click the Port Access tab.
The Port Access page opens. The following information is displayed:

Port Name - The name of the KX II-101-V2 port. Initially, this is
set to Dominion_KX2_101_Port1 but you can change the name
to something more descriptive. When you click a Port Name link,
the Port Action Menu appears.

Availability - The Availability can be Idle, Connected or Busy.