Raritan Dominion KX II-101-V2 User Manual page 30

Chapter 2: Installation and Configuration
22
Command Argument
ipauto none|dhcp
ip IP address
mask subnet mask
gw IP address
mode mode
Options
none - Enables you to
manually specify an IP
address for the device.
You must follow this option
with the ip command and
the IP address, as shown
in the following example:
interface ipauto
none ip
192.168.50.12
dhcp - Automatically
assign an IP address to
the device on startup.
interface ipauto
dhcp
The IP address to assign
to the device. To manually
set an IP address for the
first time, this command
must be used with the
ipauto command and the
none option. See ipauto
for information. After you
have manually assigned
an IP address once, you
can use the ip command
alone to change the IP
address.
Command column should
be "interface"
interface | ip | ...
interface | mask | The
subnet mask IP address
interface | gw | The
gateway IP address
interface | mode
....
The gateway IP address
The Ethernet mode. You
have the following choices:
 auto - Automatically
sets speed and
|