Disconnecting Kvm Target Servers; Connection Properties - Raritan Dominion KX II-101-V2 User Manual

Chapter 3: Working with Target Servers
42

Disconnecting KVM Target Servers

To disconnect a target server:

On the Port Access page, click the port name of the target you want
to disconnect from, then click Disconnect on Port Action menu when
it appears.
Tip: You can also close the Virtual KVM Client window by selecting
Connection > Exit from the Virtual KVM menu.

Connection Properties

Dynamic video compression algorithms maintain KVM console usability
under varying bandwidth constraints.
The devices optimize KVM output not only for LAN use, but also for WAN
use.
These devices can also control color depth and limit video output,
offering an optimal balance between video quality and system
responsiveness for any bandwidth.
The parameters in the Properties dialog can be optimized to suit your
needs for different operating environments. Connection properties are
saved across subsequent connections to generation 2 devices once they
are set and saved.
To set the connection properties:
1. Choose Connection > Properties or click the Connection Properties
button in the toolbar. The Properties dialog appears.
2. Choose the Connection Speed from the drop-down list. The device
can automatically detect available bandwidth and not limit bandwidth
use. However, you can also adjust this usage according to
bandwidth limitations.

Auto

1G Ethernet

100 Mb Ethernet

10 Mb Ethernet

1.5 Mb (MAX DSL/T1)

1 Mb (Fast DSL/T1)

512 Kb (Medium DSL/T1)

384 Kb (Slow DSL/T1)

256 Kb (Cable)