Mouse Options - Raritan Dominion KX II-101-V2 User Manual

Changing the Maximum Refresh Rate
If the video card you are using on the target uses custom software, and
you are accessing the target through the Virtual KVM Client (VKC) or
Multi-Platform Client (MPC), you may need to change the maximum
refresh rate of the monitor in order for the refresh rate to take effect on
the target.
To adjust the monitor refresh rate:
®
1. In Windows , select Display Properties > Settings > Advanced to
open the Plug and Play dialog.
2. Click on the Monitor tab.
3. Set the 'Screen refresh rate'.
4. Click OK and then OK again to apply the setting.

Mouse Options

When in dual mouse mode, and provided the option is properly
configured, the mouse cursors align.
In dual mouse mode, when controlling a target server, the Remote
Console displays two mouse cursors: one belonging to your KX II-101-
V2 client workstation, and the other belonging to the target server.
You can operate in either single mouse mode or dual mouse mode.
When there are two mouse cursors, the device offers several mouse
modes:

Absolute (Mouse Synchronization)

Intelligent (Mouse Mode)

Standard (Mouse Mode)
When the mouse pointer lies within the KVM Client target server window,
mouse movements and clicks are directly transmitted to the connected
target server.
While in motion, the client mouse pointer slightly leads the target mouse
pointer due to mouse acceleration settings.
On fast LAN connections, you can use single mouse mode, and view
only the target server's pointer.
You can toggle between these two modes (single mouse and dual
mouse).
Chapter 3: Working with Target Servers
53