Http And Https Port Settings; Entering The Discovery Port - Raritan Dominion KX II-101-V2 User Manual

2. Select Enable SSH Access.
3. Enter the SSH Port information. The standard SSH TCP port number
is 22 but the port number can be changed to provide a higher level of
security operations.
4. Click OK.

HTTP and HTTPS Port Settings

You are able to configure HTTP and/or HTTPS ports used by the KX II-
101-V2. For example, if you are using the default HTTP port 80 for
another purpose, changing the port will ensure the device does not
attempt to use it.
To change the HTTP and/or HTTPS port settings:
1. Choose Device Settings > Device Services. The Device Service
Settings page opens.
2. Enter the new ports in the HTTP Port and/or HTTPS Port fields.
3. Click OK.

Entering the Discovery Port

The KX II-101-V2 discovery occurs over a single, configurable TCP Port.
The default is Port 5000, but you can configure it to use any TCP port
except 80 and 443. To access the KX II-101-V2 from beyond a firewall,
your firewall settings must enable two-way communication through the
default Port 5000 or a non-default port configured here.
To enable the discovery port:
1. Choose Device Settings > Device Services. The Device Service
Settings page opens.
2. Enter the Discovery Port.
3. Click OK.
Chapter 6: Device Management
101