Raritan Dominion KX II-101-V2 User Manual page 23

2. Connect the USB connector of the KVM cable to the KX II-101-V2
and to a USB port on the target server.
3. Connect a monitor to the KX II-101-V2 Local User Port if you need to
use the local video. Optional
4. Connect the USB keyboard and mouse directly to the target.
Optional
PS/2 Configuration
Note: If you are using virtual media, you must use the USB connection.
To configure the KX II-101-V2 for use with a PS/2 target server:
1. Use the attached video cable to connect the KX II-101-V2 to the
target video port.
2. Connect the PS/2 connector of the KVM cable to a PS/2 port on the
target.
3. Connect a monitor to the KX II-101-V2 Local User Port if you need to
use the local video. Optional
If you have a PS/2 keyboard and mouse, use a PS/2 to USB adapter (not
included) to connect to the USB port of the target directly. Optional
Chapter 2: Installation and Configuration
15