Network Speed Settings - Raritan Dominion KX II-101-V2 User Manual

Port Description
Configurable Ports via the LDAP/LDAPS protocol, ports 389 or 636 will be used, but the
389 or 636 system can also be configured to use any port of your designation.
Optional
RADIUS on If the KX II-101-V2 is configured to remotely authenticate user logins
Configurable Port via the RADIUS protocol, either port 1812 will be used, but the system
1812 can also be configured to use any port of your designation. Optional
RADIUS Accounting If the KX II-101-V2 is configured to remotely authenticate user logins
on Configurable Port via the RADIUS protocol, and also employs RADIUS accounting for
1813 event logging, port 1813 or an additional port of your designation will be
used to transfer log notifications.
SYSLOG on If the KX II-101-V2 is configured to send messages to a Syslog server,
Configurable UDP then the indicated port(s) will be used for communication - uses UDP
Port 514 Port 514.
SNMP Default UDP Port 161 is used for inbound/outbound read/write SNMP access and
Ports port 162 is used for outbound traffic for SNMP traps. Optional
TCP Port 22 Port 22 is used for the KX II-101-V2 command line interface (when you
are working with Raritan Technical Support).
SSH (Secure Shell) SSH port can be configured. The default is port 22.
Telnet Telnet port can be configured but is not recommended. The default port
is 23.

Network Speed Settings

KX II-101-V2 network speed setting
Network
switch port
setting
Auto
100/Full
100/Half
Auto 100/Full
Highest KX II-101-
Available V2: 100/Full
Speed
Switch:
100/Half
KX II-101- 100/Full
V2: 100/Half
Switch:
100/Full
100/Half KX II-101-
V2: 100/Full
Switch:
100/Half
Appendix A: Specifications
100/Half 10/Full
100/Half KX II-101-
V2: 10/Full
Switch:
10/Half
KX II-101- No
V2: 100/Half Communica
tion
Switch:
100/Full
100/Half No
Communica
tion
10/Half
10/Half
No
Communicat
ion
No
Communicat
ion
181