Ssh Access From A Unix/Linux Workstation; Logging In; Navigation Of The Cli; Cli Prompts - Raritan Dominion KX II-101-V2 User Manual

Chapter 11: Command Line Interface (CLI)

Logging in

Navigation of the CLI

164

SSH Access from a UNIX/Linux Workstation

To open an SSH session from a UNIX
log in as the user admin, enter the following command:
ssh -l admin 192.168.30.222
The Password prompt appears.
To log in:
1. Login: admin
2. The password prompt appears. Enter the default password: raritan.
The welcome message appears. You are now logged in as an
Administrator.
After reviewing the following
section, you can perform the initial configuration tasks described in
Configure the KX II-101-V2 Using a Terminal Emulation Program
(Optional) (on page 21).
Before using the CLI, it is important to understand CLI navigation and
syntax. There are also some keystroke combinations that simplify CLI
use.

CLI Prompts

The Command Line Interface prompt indicates the current command
level. The root portion of the prompt is the login name. For a direct admin
serial port connection with a terminal emulation application, Admin Port
is the root portion of a command.
admin >
For Telnet/SSH, admin is the root portion of the command:
admin > config > network >
0
®
/Linux

Navigation of the CLI

®
workstation and
(on page 164)