Raritan Dominion KX II-101-V2 User Manual page 149

3. Choose the Policy from the drop-down list.
4. Click Replace. Your new rule replaces the original rule with the same
rule number.
To delete a rule:
1. Specify the rule number you want to delete.
2. Click Delete.
3. You are prompted to confirm the deletion. Click OK.
To allow access to only one IP address and block all others, change the
subnet mask for the rule to /32. For example, if you are trying to exclude
all access from the '192.168.51' subnet and the Default Policy is Accept,
you would Append a Rule with IP/MASK set to 192.168.51.00/24 and a
policy DROP. Or, if you are trying to exclude all access from the
192.168.51 subnet except from a specific IP address (192.168.51.105)
and the Default Policy is Accept, you would:
1. Append Rule 1 with IP/Mask set to 192.168.51.105/32 and a policy
of Accept.
2. Append Rule 2 with IP/Mask set to 192.168.51.0/24 and a policy of
Drop.
If you reversed Rule 1 and Rule 2, 192.168.51.105 would also not be
able to access the KX II-101-V2 since it would also have been dropped
by the first rule that is encountered.
Chapter 8: Security Management
141