Raritan Dominion KX II-101-V2 User Manual page 118

Chapter 6: Device Management
110
Note: IPv6 addresses cannot exceed 80 characters in length for the
host name.
b. Port Number - the port number used by the SNMP manager
c. Security Name - the username or service account name of the
entity communicating with the SNMP agent (up to 32 characters)
d. Authentication Protocol - the MD5 or SHA authentication
protocol used by the SNMP v3 agent
e. Authentication Passphrase - the passphrase required to access
the SNMP v3 agent (up to 64 characters)
f. Privacy Protocol - if applicable, the AES or DES algorithm used
to encrypt PDU and context data
g. Privacy Passphrase - the passphrase used to access the privacy
protocol algorithm (up to 64 characters)
6. Click OK to create the SNMP traps.
Use the Link to SNMP Agent Configuration link to quickly navigate to the
Devices Services page from the Event Management - Settings page.
The events that are captured once an SNMP trap is configured are
selected on the Event Management - Destination page. See Configuring
Event Management - Destinations.
KX II-101-V2 supports SNMP logging for SNMP v1/v2c and/or v3. SNMP
v1/v2c defines message formats and protocol operations when SNMP
logging is enabled. SNMP v3 is a security extension of SNMP that
provides user authentication, password management and encryption.
To edit existing SNMP traps:
1. Choose Device Settings > Event Management - Settings. The Event
Management - Settings page opens.
2. Make changes as needed and click OK to save the changes.