Allow Pop-Ups; Security Warnings And Validation Messages - Raritan Dominion KX II-101-V2 User Manual

Allow Pop-Ups

Security Warnings and Validation Messages

Command Argument
When you have successfully changed a setting, you see a confirmation
message like the following:
Admin Port > config
Admin Port > Config > network
Admin Port > Config > Network > interface ipauto
none ip 192.168.50.126
Network interface configuration successful.
When you are finished configuring the KX II-101-V2, type logout at the
command prompt and press Enter. You are logged out of the command
line interface.
Regardless of the browser used, you must allow pop-ups from the
device's IP address to launch the KX II-101-V2 Remote Console.
When logging in to KX II-101-V2, security warnings and application
validation message may appear.
These include:

™
Java security warnings and requests to validate KX II-101-V2. See
Java Validation and Access Warning
a Certificate (on page 24)

Additional security warnings based on your browser and security
settings. See Additional Security Warnings
Chapter 2: Installation and Configuration
Options
interface mode based
on the network.
 10hdx - 10 MB/s, half
duplex.
 10fdx - 10 MB/s, full
duplex
 100hdx - 100 MB/s,
half duplex
 100fdx - 100 MB/s, full
duplex
(on page 24), and
(on page 24)
Installing
23