Raritan Dominion KX II-101-V2 User Manual page 22

Chapter 2: Installation and Configuration
14
Target Server
Use either the PS/2 or USB to connect to the target.
Before connecting, configure your target server's video to a supported
resolution.
Use the USB connection if you are using virtual media or Absolute
Mouse Mode.
The following items are in each of the connection diagrams that follow:
- KX II-101-V2
- Target server
- Local monitor Optional
- Local mouse and keyboard Optional
USB Configuration
Note: If you are using virtual media, you must use the USB connection.
To configure the KX II-101-V2 for use with a USB target server:
1. Use the attached video cable to connect the KX II-101-V2 to the
target video port.