Raritan Dominion KX II-101-V2 User Manual page 84

Chapter 5: User Management
76
control. It is possible to be locked out of your KX II-101-V2 if your IP
address is within a range that has been denied access.
This feature limits access to the KX II-101-V2 device by users in the
selected group to specific IP addresses. This feature applies only to
users belonging to a specific group, unlike the IP Access Control List
feature that applies to all access attempts to the device, is processed
first, and takes priority.
Important: The IP address 127.0.0.1 is used by the KX II-101-V2
Local Port and cannot be blocked.
Use the IP ACL section of the Group page to add, insert, replace, and
delete IP access control rules on a group-level basis.
To add (append) rules:
1. Type the starting IP address in the Starting IP field.
2. Type the ending IP address in the Ending IP field.
3. Choose the action from the available options:

Accept - IP addresses set to Accept are allowed access to the
KX II-101-V2 device.

Drop - IP addresses set to Drop are denied access to the KX II-
101-V2 device.
4. Click Append. The rule is added to the bottom of the rules list.
Repeat steps 1 through 4 for each rule you want to enter.
To insert a rule:
1. Enter a rule number (#). A rule number is required when using the
Insert command.
2. Enter the Starting IP and Ending IP fields.
3. Choose the action from the Action drop-down list.
4. Click Insert. If the rule number you just typed equals an existing rule
number, the new rule is placed ahead of the exiting rule and all rules
are moved down in the list.