Delete A Firmware Version; Download A Firmware Version To A Switch - HP storageworks 2/32 Installation Manual

Manage Firmware Versions

Delete a Firmware Version

Use these steps to delete a firmware version from the library stored on the HAFM
server hard drive:
1. At the HAFM server, open the HAFM application. The Products View page
2. Double-click the icon representing the edge switch from which the firmware
3. Choose Maintenance > Firmware Library. The Switch Firmware Library
4. Choose the firmware version to be deleted and click Delete. A confirmation
5. Click OK. The selected firmware version is deleted from the Switch
6. Click Close.

Download a Firmware Version to a Switch

This procedure downloads a selected firmware version from the HAFM server
library to an edge switch managed by the open instance of the Product Manager
application. The procedure applies to an edge switch with two (redundant) CTP2
cards. The process occurs concurrently without taking the edge switch offline or
disrupting operation. The new firmware version takes effect when control is
passed from the active to the backup CTP2 card. Although edge switch operation
is not affected, name server, alias server, and login server functions are
momentarily unavailable during CTP2 card switchover. Although traffic is not
disrupted, the green port LEDs will flicker or blink during the IPL portion of this
operation as control is passed to the other CTP2 card.
Note:
release notes that accompany the firmware version. This information supplements
information provided in this general procedure.
108
displays.
version will be deleted. The Hardware View page for the selected edge
switch displays.
dialog box displays, as shown in
dialog box displays.
Firmware Library dialog box.
When downloading a firmware version, follow procedural information in the
Figure 45.
Edge Switch 2/32 Installation Guide