Deleting Privacy Zones One At A Time - Honeywell ACUIX ES Installation And Configuration Manual

Task/Action with Default
Setting the Privacy Zone Security Level to High or Low
1. Ensure you have manual control of the dome.
2. Press 75 Preset.
3. Enter the 4-digit PIN. The default is 1000.
The Password Settings window opens.
4. Select 4 PrivZone Security Level > High
(default) or Low.
• If the security level is set to High, you cannot
program the privacy zone at a zoom level of
more than 10X and the mask size is increased
once a zone is programmed. Also while
zooming in/out the patch size increases to
prevent objects from being uncovered.
• If the security level is set to Low, you can
program the privacy zones at any zoom level
and the mask size is not increased once a
zone is programmed. This means that when
you zoom in or out quickly, the privacy zone
may uncover the object.

Deleting Privacy Zones One at a Time

1. Select 6 Function Programming > 3 Privacy
Zone Options > 4 Delete Privacy Zones.
2. Locate and select the applicable privacy zone to
delete.
The message Delete Success displays or, if
the selected privacy zone number is not
programmed, Does Not Exist displays.
Document 800-01949 Rev D
05/09
Table 3-5 Privacy Zone Functions
TM
ACUIX ES Installation and Configuration Guide
Notes
Even if the user or privacy zone login PIN is disabled, a
password is still required to enter the Admin
Login/Password Settings menu.
Existing programming does not have to be deleted to
be reprogrammed. You can edit the coordinates for an
existing mimic tour, privacy zone, preset, or Sector by
following the applicable programming procedures
This menu is only available with MAXPRO-mode, VCL,
UTP and Pelco P or D protocols.
65