Configuring Privacy Mask; Figure 46 Privacy Mask - Honeywell 30 Series Manual

By default, the optimal focus is found on a full view window. You can designate a
custom window within your current field of view to acquire the best focus out of it.
However, you cannot place a focus window on a distant background, e.g., a hallway that
stretches away for 3 meters or farther.
•
Full view: The focus tuning takes place by referring to the full view.
•
Custom: You can create a focus window and drag it to a place of interest in your view
window.
It is recommended to use this function only when there's a solid object showing a
Note: consistent color or texture in your view window. This function will not take effect if
you set the focus window on a distant background.

Configuring Privacy Mask

On this page, you can block out sensitive view areas to address privacy concerns.
Go to Setup  Camera Setup  Privacy Mask.
To configure privacy masks for Non-PTZ models:
1. Click NEW to add a new privacy mask window on the video screen.
2. Use 4 mouse clicks to create a new mask window, which is recommended to be at least
twice the size of the object (height and width) you want to cover.
3. Enter a name for the privacy mask and click SAVE to enable the setting.
4. Check Enable privacy mask to enable this function.

Figure 46 Privacy Mask

•
Note:
•
Honeywell 30 Series IP Cameras User Guide
Up to 5 privacy mask windows can be configured on the same screen.
If you want to delete the privacy mask window, click
privacy mask window name.
on the right side of
39