Acuix Es Terminology And Features; Table 1-1 Acuix Es Terminology - Honeywell ACUIX ES Installation And Configuration Manual

Introduction to the ACUIX ES PTZ Dome
Font What it represents
Lucida
Text strings displayed on the OSD menu.
Swiss721 •
BT Bold
•
•
Italic
•
•

ACUIX ES Terminology and Features

Term
dome
scan assembly
camera
housing
mount
lower dome
14
Words or characters that are typed.
Pressing a key on the controller.
Selecting a menu item from the OSD.
Cross-reference to external source.
Cross-reference within document.
Table 1-1 ACUIX ES Terminology
Definition
The complete installed product including the housing, lower dome, and
the scan assembly.
The combination of firmware, electrical and mechanical components
including the camera. The scan assembly is either pre-installed or
installed separately into the housing and enclosed by a lower dome. The
scan assembly is a component of a dome.
The particular camera model (for example, the Sony FCB EX45C)
purchased. The camera is a component of the scan assembly.
The in-ceiling, indoor or outdoor pendant and surface mount upper
enclosure. Housing is a hardware component of the dome.
The hardware used to mount the housing to the applicable surface (for
example, a ceiling or wall). The mount is a hardware component used with
a specific type of housing.
The clear or colored enclosure that covers the scan assembly and
attaches to the housing. The lower dome is a hardware component of the
dome.
Example
The message Unauthorized displays
(object) entered.
• Enter the password .
• Press and hold wash.
• Select 2 Control Options > 1 PASS.
• Refer to the Honeywell Video website
http://www.honeywellvideo.com/
• See Introduction to the HDX-LT PTZ
Dome on page 13
.