Setting The Baud Rate, Parity And Protocol (Sw2 And Sw3); Table 2-3 Dip Switch Baud Rate And Parity Settings (Sw2 1 - 6) - Honeywell ACUIX ES Installation And Configuration Manual

Installing the ACUIX ES

Setting the Baud Rate, Parity and Protocol (SW2 and SW3)

34
1. Set the baud rate and parity on SW2. See
in the required positions if different from the defaults.
• To make changes to the default, use
for examples.
2. Set the protocol on SW3. See
required positions if different from the defaults.
• To make changes to the default, use
for examples.
Table 2-3 DIP Switch Baud Rate and Parity Settings (SW2 1 - 6)
Baud Rate Baud Rate Switch Position
and Parity
Values
1
600 OFF
1200 ON
2400 OFF
4800 ON
9600 OFF
19200 ON
38400 OFF
57600 ON
115200 OFF
None
Even
Odd
Figure 2-1. Carefully place the SW2 switch
Table 2-3
Figure 2-1. Carefully place the SW3 switch in the
Table 2-4
2 3 4
OFF OFF OFF
OFF OFF OFF
ON OFF OFF
ON OFF OFF
OFF ON OFF
OFF ON OFF
ON ON OFF
ON ON OFF
OFF OFF ON
and see Figure 2-2 and Table 2-2
and see Figure 2-2 and Table 2-2
Parity Switch
Position
5 6
OFF OFF
ON OFF
OFF ON