Pelco P_Ad And Pelco D_Ad Special Presets - Honeywell ACUIX ES Installation And Configuration Manual

Pelco P_AD and Pelco D_AD Protocols

Pelco P_AD and Pelco D_AD Special Presets

80
See Step 3: Learn How to Use the Special Presets
special presets. Enter the preset numbers in the table below for each task when using the
Pelco P_AD and Pelco D_AD protocols. With these protocols, presets are limited based on
the AD controller or matrix system being used. Presets 1 to 19 are available for custom
programming.
Table A-2 Pelco P_AD and Pelco D_AD Special Presets
Preset Function
20 Setup menu (on-screen display/OSD)
22 Toggles backlight compensation ON and OFF (preset 23 /auto
exposure must be ON)
23 Toggles auto exposure or iris ON and OFF (factory default is ON)
24 Run mimic tour menu
25 Program mimic tour menu
26 Stop or end mimic tour programming sequence
27 Run continuous preset tours menu
28 Administrator / password/PIN settings:
29 Recover encrypted user login PIN
30 Camera lens reset or cycles the power (camera dependent)
31 Toggles between freeze and unfreeze
32 Run Flashback and toggle between two saved positions to return to
a scene of interest
on page 48 for instructions to use the