Assigning Or Editing Privacy Zone Priority Order - Honeywell ACUIX ES Installation And Configuration Manual
Ptz analog dome
Hide thumbs
Also See for ACUIX ES:
- Installation manual (24 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
Configuring the ACUIX ES
Task/Action with Default
Assigning or Editing Privacy Zone Priority Order
1.
Select 6 Function Programming > 3 Privacy
Zone Options > 1 Change Priv Zone Priority.
2.
From the Zone Name or Zone ID columns, select
a privacy zone to edit and assign a different
priority number.
3.
In the From field, enter the current priority
number, for example, 4.
4.
In the To field, enter the new priority number, for
example, 1.
Enabling or Disabling Privacy Zones (PZ)
1.
Select 6 Function Programming > 3 Privacy
Zone Options > 2 Enable/Disable PZ >
2.
Navigate to the Enabled column and select Y
(yes) for enable (default) or N (no) for disable.
•
If a privacy zone is disabled, the
programming is saved, but the video is not
blanked when the dome moves into the
programmed privacy zone area.
ENABLE/DISABLE PZONE MENU
ZONE
ID
-
1
2
3
ESC to Exit
64
Table 3-5
Privacy Zone Functions
ZONE
NAME
ENABLED
-
PRIVACY 1
Y
PRIVACY 2
Y
PRIVACY 3
Y
Notes
Use this menu to organize or edit the order of priority for
privacy zones. Priority 1 has the highest priority
and Priority 24 the lowest no matter the privacy
zone number assigned. That is to say, there is no
relation between zone id and zone priority.
The priority order is useful if privacy zones overlap.
CHANGE PRIV ZONE PRIORITY
PRIORITY PZ_NAME
1 Privacy 1
2 Privacy 2
3 Privacy 3
Change Priority _-- to --
ESC to Exit
•
The programmed zones are displayed in
ascending order of Zone ID and indicate whether
the privacy zone is enabled (Y) or disabled (N).
•
If a privacy zone is disabled, it does not display on
the PTZ Priority Menu.
•
When a privacy zone is enabled, it is assigned the
highest unused priority available.
•
To move between the rows on the same page,
move the joystick up or down (MaxPRO-mode,
VCL, VCL-UTC, Pelco P or D) or press the arrow
keys left and right (Diamond/IntelliBus). To move
between pages (if there are more than six privacy
zones) move the joystick left or right
(MaxPRO-mode, VCL, VCL-UTC, Pelco P or D) or
page up, page down and home
(Diamond/IntelliBus).
ZONE
ID
-
1
2
3
Advertisement
Table of Contents
