Configuring Contacts/Alarms (Optional) - Honeywell ACUIX ES Installation And Configuration Manual

Task/Action with Default
Viewing a List of Sectors
• Select 6 Function Programming > 4 List
PS/PT/Sectors > 3 Sectors.
Deleting a Sector
1. Select 6 Function Programming > 7 Delete
PS/PT/MT/Sectors.
2. Locate and select the applicable Sector number.
The message Delete Success displays or if the
selected function and number is not programmed,
the message Does Not Exist displays instead.

Configuring Contacts/Alarms (Optional)

Document 800-01949 Rev D
05/09
Table 3-6 Sector Functions
Note The term contact and alarm are used interchangeably to mean the same
thing. Alarm is currently displayed on the OSD, although contact is a better
description since it is not an audible alarm but a change in electrical state to
the contacts resulting in a programmed response.
Up to two standard and six optional contacts/alarms can be programmed. See
and Table 3-7 for instructions. Also see
page 59.
TM
ACUIX ES Installation and Configuration Guide
Notes
The list is generated on screen of all programmed
sector.
Existing programming does not have to be deleted to
be reprogrammed. You can edit the coordinates for an
existing Sector by following the applicable
programming procedure.
Configuring Default Functions: Presets and Tours
Table 3-8
on
67