Exiting Or Escaping From A Menu - Honeywell ACUIX ES Installation And Configuration Manual

Document 800-01949 Rev D
05/09

Exiting or Escaping from a Menu

Note Depending on the protocol used, for example with the HJZTP controller, the
monitor displays different exit instructions.
To exit or escape from a menu (VCL):
The monitor displays press Iris Close. Press Iris (-).
•
Note In VCL protocol, press Iris (+) to open a menu and Iris
(-) to close a menu. The OSD uses the terms Iris Open
and Iris Close to mean the same thing respectively. In
some menus, you can also use these keys to toggle
between values.
To exit or escape from a menu (MAXPRO-mode or Diamond):
The monitor displays press Esc. When using an HJZTP controller, press lock.
•
TM
ACUIX ES Installation and Configuration Guide
Iris open
Iris close
51