Privacy Zone (Menu => Screen => Privacy Zone) - Honeywell ScanDome III HSDC-252 Series Operation & Programming Manual

3.3.2 PRIVACY ZONE (MENU => SCREEN => PRIVACY ZONE)
Locate the cursor on the PRIVACY ZONE item and then push the joystick to the right to enter
the menu.
This function disables the viewing of restricted areas for privacy reasons. Mask up to 8
unwanted views in a camera.
1. Select the Privacy Zone option by pushing Joystick Up or Down and push to right to
enter the detail menu.
2. Select the privacy zone number by pushing the Joystick up or down.
3. To enter the zone name, rotate the handle clockwise or counterclockwise. You can select
alphanumeric characters by rotating the handle. Move to the next character position by
pushing the Joystick to the right. To finish entering the title, push the Joystick down or
press the ENTR key.
4. To adjust the "marked" (privacy) area, press and hold down the SHFT/PGM key and then
use the Joystick (direction and zoom) until you get desired view. Release the key, the
right column will be set to ON. (Or twist zoom handle or hit zoom button to start PTZ
control for view selection and hit the Focus button to exit from control mode.)
5. You can overwrite an existing zone. Use the Home key to delete the marked zone, or push
the Joystick to the right or left to turn the stored zone On or Off.
6. Select the mask color by pushing the Joystick left or right
Screen Menu
Language
Privacy Zone
North Direction
Zone Title
Camera Title
Exit
Privacy Zone Setup
No Title
01 xxxxxxxxxxxxxxxx
02 xxxxxxxxxxxxxxxx
03
04
05
06
07
08
Color : Blue
Save And Exit
Method
ON MASK
OFF V.OFF
OFF ----
OFF ----
OFF ----
OFF ----
OFF ----
OFF ----
26