Installing The Acuix Es; Installation Warnings And Cautions - Honeywell ACUIX ES Installation And Configuration Manual

Installing the ACUIX ES

Installation Warnings and Cautions

Document 800-01949 Rev D
05/09
In this section:
• Installation Warnings and
• DIP Switch Default Settings and
• Selecting Video Over Coaxial Cable or Unshielded Twisted Pair
• Setting the Baud Rate, Parity and Protocol (SW2 and
• Setting the RS485 Control Data Termination
• Setting the Dome Address
• Connecting the Power and RS485 Data
• Connecting the Optional Contact Input
• Installing Indoor Pendant or Surface
• Installing In-Ceiling Domes, page 43.
All installations must be performed by qualified technical personnel and must be
in accordance with all national and local mechanical and electrical codes.
Ensure the mounting surface and installation hardware can hold the combined
weight of the scan assembly, housing, lower dome and mount.
To prevent damage to the interface board, follow standard industry precautions
for electrostatic discharge-sensitive devices.
Note Also see Cabling Recommendations and
Cautions, page 27.
Locations, page 28.
(SW5), page 35.
(SW4), page 35.
Wiring, page 37.
Wiring, page 39.
Domes, page 40.
Cautions, page 20.
2
(SW1), page 33.
SW3), page 34.
27